Welcome to our WIRES-X room 24224 + DMR 950615 + YSF 31022
 
Yaesu FT2DR

Yaesu FT2DR
Yaesu FT2DR is a portable digital-analog radio amateur transceiver for VHF and UHF bands: 140-174 and 420-470 MHz. The radio has a touch screen with a diagonal of 1.7 inches, and works both in analog AM and FM, and in digital C4FM mode. AMS - automatic mode selection allows you to determine the type of the received signal and instantly switch to it.

Wires-x radio station Yaesu FT2DR can recive from 0.5 to 999 MHz. Transmission is possible in radio amateur bands - 140-174 and 420-470 MHz with an output power of up to 5 watts. The radio station has a high sensitivity of 0.16 mKv at 12 dB SINAD. Support for C4FM WIRES-X, GPS, APRS significantly expand the capabilities of the radio station, and the touch screen allows you to conveniently and easily manage all functions.

With the built-in GPS receiver, the Yaesu FT2DR can quickly establish a location, showing the direction and distance to another operator. It is possible to purchase a microfon with a built-in camera, and transmit the photo to the air.

The Yaesu FT2DR has a pager function for calling certain stations. The function allows to make individual calls of certain subscribers. The radio station also has a graphical spectrum analyzer with indication of signal levels.

Yaesu FT2DR price ≈ $500

Yaesu FT2DR specifications:

• Received frequencies: 0.5-999 MHz
• Transmission frequencies: 140-174; 420-470 MHz
• Output power: up to 5 watts
• Number of cells: 1266
• Modulation: F1D, F2D, F3E, F7W
• Type of digital modulation: C4FM 4FSK FDMA
• Built-in GPS module with antenna
• Receiver type: superheterodyne with double conversion
• Two independent receivers
• Automatic detection of the type of modulation
• Monochrome touch screen 160x160 pixels
• Spectrum analyzer function
• Slot for microSD memory cards (from 2 to 32 GB)
• Picture function (optional with MH-85A11U tangent)
• Input of frequency from the touch keyboard
• WIRES-X function
• Programmable scanning algorithms
• Battery 2200 mAh
• APRS 1200 / 9600bps
• Self-timer on / off timer
• Built-in LED flashlight
• Unique personal calling codes
• Adjusting the microphone gain
• Vibrate alert function

• Step of the grid, kHz: 5/6.25/8.33/10/12.5/15/20/25/50/100
• Type of squelch: adjustable SQ
• Power supply, V: 7,4
• Maximum current consumption, mA: 1800 Max TX
• Connector type for antenna: SMA-female
• Dynamic power, mW: 700
• IPX5 Compliance Standards
• Operating temperature range, ° С: -20 ... +60
• The sizes, mm: 62х110х32,5
• Weight, g: 310

Yaesu FT2DR digital manuals

. FT2DR/DE WIRES-X Node Operation Instruction Sheet (12/21/17) ( 585.53 KB )
FT2DR/DE Operating Manual (Including the DG-ID function information) 9/20/17 ( 38.03 MB )
FT2DR/DE Instruction Manual (GM Edition) 9/26/17 ( 3.75 MB )
FT2DR/DE Quick Guide ( 2.30 MB )
FT2DR/DE Instruction Manual (WIRES-X Edition) 12/20/17 ( 9.41 MB )
Amateur Radio Digital Standards ( 997.05 KB )

Yaesu FT2DR manuals

. FT2DR Instruction Manual (APRS Edition) ( 22.48 MB )
FT2DR/DE Operating Manual ( 37.21 MB )
FT2DR Instruction Manual (GM Edition) ( 6.80 MB )

Soft and firmware for Yaesu FT2DR

. ADMS-8 Programming Software with FT2DR/DE MAIN firmware “Ver. 2.02” or later ( 65.67 MB )
FT2DR/DE ADMS-8 Programming Software Ver.1.0.0.2 (4/1/16) ( 65.30 MB )
FT2DR/DE [FT2D_Firmware_Update_0913.zip] ( 50.63 MB )
FT2DR/DE Update Firmware Information adds the DG-ID function (Rev 4) 9/13/17 ( 43.82 KB )
FT2DR/DE DSP Firmware Update Instruction Manual [1705-B] 9/7/17 ( 5.36 MB )
FT2DR/DE Main/Sub Firmware Update Instruction Manual [1804D] 4/23/18 ( 8.67 MB )
SCU-19 USB Driver Installation Manual ( 1.10 MB )
SCU-19 USB Driver (PL2303) ( 2.17 MB )

Yaesu FT2DR accessories


E-DC-6 - Charging cable

MH-34B4B - Mic with speaker

PA-48C - Charging

CD-41 - Charging cradle

FNB-101LI - 1100mAh Li-Ion

SDD-13 - Charging

SSM-57A - Headset with PTT

SSM-63A - Headset PTT+VOX

 
© 2018 UA6LQP